FAQ

Using wrong materials and improper installation of fire stopping weakens the entire fire safety system. Our extraordinary fire services include.

Intumescent is word describing passive fire products and it means to expand when it’s in contact with heat.

Yes, you need heat and smoke seals for the fire door as they completely fill all the gap, providing defense against fire and smoke.

Yes, it should be adequately protected by fire-stopping so that fire resistance of the component is not weakened.

The fire protection coatings offers a higher level of protection than the flame retardants. It will stop the material from burning through, holding the fire for approximately 30 to 60 minutes.

The fire resistance of a component is something like the steel column, which can resist the fire for a period of time.

These are an opening for fire, hot gases, and smoke, which can spread fire to the adjacent parts of the building.

Proper maintenance will keep your systems reliable and effective. Avoid propping the door open, turn the lights off, and don’t stack items around the coil. Rest we will guide you through the maintenance of the system

While a DIY looks fun and money saving, refrigeration installation is the work of professionals only. First it’s not an easy process and second you have to go through health department’s codes.

Refrigeration system and coolers come in stock sizes. You will get a lot of options to choose from. Basically, it should suit your space and needs. We will help you understand your requirements so that you can have the best system installed.

These are the five reasons why your walking cooler isn’t working

• Fluctuating Temperatures
• Freezing
• Compressor Won’t Run
• Failure to Maintain Pressure

A floor is a very important part of a cooler as the walk-in cooler works the best when installed on a level. If you have a wooden floor, you can choose an insulated floor over it.

A programmable thermostat increases the efficiency of your home by providing consistent temperature. There is also a benefit of zoned heating and cooling, if you are using a programmable thermostat.

The indoor range of relative humidity is 35 to 50%, but 40 to 45% work best for most homes. Anything above this can cause condensation on the windows and becomes breeding ground for mold that leads to allergies.

The HVAC system traps all kinds of dust, debris, and germs to clean the air. They’re even responsible for maintaining the indoor air quality. A regular maintenance includes cleaning of the filter and ensuring, it is working properly. Regular maintenance ensure that your HVAC works longer.

These are the different types of HVAC filters

• Fiberglass Air Filters. Disposable
• Pleated filters
• Washable Air Filters
• Electrostatic Air Filters
• HEPA Filters
• UV Filters

While washable filters track only the large dust particles, a disposable filter will trap even the tiniest particle of dust. Disposable ones are not good at effectively putting out pet dander, bacteria, and viruses.

High-end filter last as long as 6 months, so you can go free a season or more. However, every system and filter has its own requirement, so consider it accordingly. Are washable HVAC filters good?

Construction drawings includes all the building designs and revision that has taken place while designing the building. But the shop drawing will be detail drawing of components to depict how the construction was originally done.The shop drawing often is more detailed than the information shown in the construction documents to give the architect and engineer the opportunity to review the fabricator’s version of the product, prior to fabrication.

Shop drawing of your project must include orthographic projections, multiple views, section views, and axonometric views. The requirement may change depending on the project. Communicate with your team to state your requirements.

Shop drawings are not a part of contract document as it doesn’t define any work responsibilities. Most of the time these drawings and illustrations are submitted to the contractor or by the contractor.

Professionals in both design and construction field use shop drawings. It’s basically a means of communication between engineers, construction professionals, architects and engineers. Since shop drawing in the only way to ensure that all parties involved in a construction work are on the same page, it’s a crucial part of any business.

Shop drawing is a set of drawing that illustrates and aids in the prefabrication of a structure. As it communicates with the construction and fabrication process, it’s said to be a better and more detailed version of the design drawing.